O Ring Size Guide

If you're unsure which o ring is best for your glasses, please feel free to email me - theframegameau@gmail.com

5mm Information

IF YOUR GLASSES ARE ULTRA SKINNY WITH A WIDE END, THE SMALLEST 5MM O RINGS WILL NOT BE ABLE TO STRETCH OVER THE END IF IT IS GREATER THAN 6MM AND FIT THE SKINNY ARM - if the arm is tapered and 6mm or less then you might be able to slide it on if you go slowly ** see video below for how to **

If this sounds like your glasses, we can either size up the o ring, use a normal glasses chain attachment instead, OR you can take the legs off the glasses frame and slide on the o ring from the other side :)

This is the screw you would unscrew if you needed to take off your sides in order to fit a 5mm - if your glasses are springy (bend outwards beyond frame via springs) I would advise against this method

If your glasses size is a 5mm or a 6mm but has a thicker front edge like this, you'll have to size up. 7mm and above have a lot more give so you wont need to. 


Size Guide

You can measure the side of your glasses with a ruler to determine which size you will need

5mm:  3 - <5mm -- can stretch to 6mm with tool **see below for video
6mm: 5mm - 9mm -- can stretch to 1 cm with tool **see below for video
7mm: 1cm -1.5 cm 
8mm: 1.5cm -1.8
10mm: 1.8 cm +


How to use a tool to slide 5/6mm onto flared glasses

 

 

Have a question?

Ask away! Ill get back to you as soon as I can! Otherwise feel free to drop a comment below x